For Architects

Technical Support for Aluminium and Glass Architecture

Alumproof supports architects, facade designers, engineering offices, developers, and general contractors in the development of aluminium windows, doors, curtain walls, sliding systems, glazed roofs, and custom architectural structures.

We help transform architectural concepts into technically feasible, manufacturable, and installation-ready solutions. Our team can participate from the early design and tender stages through system selection, detailing, production documentation, fabrication, glazing, packaging, and delivery.

By involving Alumproof during the design stage, architects can evaluate system limitations, glazing dimensions, opening configurations, structural interfaces, drainage principles, thermal requirements, and production constraints before the project reaches construction.

Send Your Project for Review

Design Development Support

From Architectural Concept to Buildable Aluminium Systems

Complex aluminium and glass structures require coordination between architectural design, system engineering, glazing specifications, structural interfaces, production technology, and installation conditions.

Alumproof provides practical technical input that helps preserve the architectural intent while reducing avoidable redesign, incompatible specifications, excessive system costs, and production-stage conflicts.

Our role is not to replace the architect or project engineer. We work as a specialist aluminium systems partner, providing system-specific knowledge, fabrication experience, and practical recommendations based on the selected facade, window, door, or sliding system.

We can review drawings, elevations, schedules, typical sections, performance requirements, glass specifications, opening types, connection zones, and interface details. Potential technical risks can then be identified before production documentation is finalized.

Where several aluminium systems can satisfy the same architectural requirement, we can compare the available solutions and recommend an appropriate configuration based on visual appearance, thermal performance, dimensions, operational requirements, production feasibility, project location, and budget.

Architectural Support Services

How Alumproof Supports Design Teams

Our services can be adapted to the project stage and may cover individual technical questions or complete aluminium package development.

System Selection

Selection of suitable aluminium window, door, facade, sliding, folding, roof, or fire-rated systems based on the architectural concept and required technical performance.

Design Feasibility Review

Assessment of element dimensions, profile capabilities, opening configurations, glass weight, fabrication limits, transport restrictions, installation access, and interface conditions.

Typical Details and Connections

Development and review of head, sill, jamb, mullion, transom, corner, threshold, parapet, slab-edge, roof, and adjoining construction details.

Shop Drawings

Preparation or development of production-oriented drawings, elevations, sections, dimensions, opening directions, system references, glazing positions, and component information.

Interface Coordination

Coordination of aluminium systems with concrete, steel, timber, insulation, waterproofing, interior finishes, ventilated facades, roofing, and adjacent building elements.

Value Engineering

Evaluation of alternative system configurations, profile combinations, opening solutions, glass build-ups, and construction details to improve cost efficiency without compromising the essential design intent.

CNC fabrication based on architectural shop drawings

Technical Documentation

Clear Information for Coordination and Production

Accurate technical documentation is essential for coordinating aluminium systems with the building envelope and for transferring the approved design into production.

Depending on the agreed project scope, Alumproof can work with architectural plans, elevations, schedules, PDF documentation, DWG drawings, detail packages, glass specifications, and other project information.

General Arrangement Drawings

Overall elevations, element identification, principal dimensions, grid references, opening directions, and system zoning.

System Sections

Horizontal and vertical sections showing profiles, glazing positions, thermal zones, internal and external finishes, and adjoining constructions.

Connection Details

Project-specific details for fixing zones, waterproofing, insulation continuity, thresholds, parapets, slab edges, and structural openings.

Window and Door Schedules

Element references, dimensions, opening functions, profile systems, glazing requirements, finishes, hardware, and additional technical notes.

Performance Requirements

Technical Criteria Considered During System Development

The final aluminium system configuration depends on the project requirements, element dimensions, building location, exposure, installation conditions, and applicable technical documentation.

During system selection and detail development, the following criteria may be considered:

  • Thermal transmittance and insulation continuity
  • Air permeability and weather tightness
  • Water drainage and pressure equalization
  • Resistance to wind load
  • Glass dimensions, thickness, and weight
  • Acoustic performance
  • Opening forces and operational safety
  • Threshold accessibility
  • Solar control and daylight requirements
  • Corrosion exposure and surface finish
  • Maintenance and replacement access
  • Transport and installation limitations

System Platforms

Solutions Using Established European Aluminium Systems

Alumproof works with recognised European aluminium system platforms, including Schüco, Reynaers Aluminium, and Aluron.

The most suitable system is selected according to the architectural design, required performance, available dimensions, opening functions, project budget, production requirements, and destination market.

Using more than one system platform allows the project team to compare different technical approaches instead of forcing every project into one standard solution.

System-specific limitations, profile depths, visible widths, hardware options, glazing capacities, thermal configurations, and fabrication requirements are reviewed before the final recommendation is made.

Project Applications

Aluminium Solutions for Different Building Types

Our technical and production capabilities can support new construction, renovation, replacement, extension, and custom architectural projects.

Residential Architecture

Private houses, villas, apartment buildings, penthouses, terraces, winter gardens, panoramic glazing, entrance systems, and large sliding doors.

Commercial Buildings

Office buildings, retail units, hotels, restaurants, showrooms, mixed-use developments, glazed entrances, internal partitions, and curtain wall facades.

Public and Institutional Projects

Schools, healthcare facilities, municipal buildings, sports facilities, cultural buildings, and other projects requiring coordinated technical documentation.

Custom Architectural Structures

Non-standard windows, glazed roofs, canopies, atriums, aluminium screens, entrance groups, winter gardens, structural glazing, and project-specific aluminium assemblies.

Custom aluminium systems for architectural projects

Collaboration Process

A Structured Workflow for Architects and Design Teams

For the complete project route, see How We Work: drawings to delivery. The seven-stage process explains technical review, indicative pricing, engineering, written approval and the conditions for manufacturing release.

1. Project Information

The architect or project team sends available plans, elevations, schedules, specifications, reference details, performance requirements, and project location.

2. Technical Review

We review the documentation, identify missing information, evaluate system compatibility, and highlight technical or production-related risks.

3. System Proposal

Suitable systems, profile configurations, opening types, glazing options, and preliminary construction principles are proposed for discussion.

4. Detail Development

Typical sections, interfaces, dimensions, connection principles, and project-specific solutions are developed and coordinated with the design team.

5. Approval and Production Documentation

After coordination, the aluminium package is prepared for final approval, material ordering, CNC processing, fabrication, glazing, and quality control.

6. Packaging and Delivery

Finished elements are inspected, protected, labelled, packaged, and prepared for coordinated delivery to the project destination.

Manufacturing Integration

Design Decisions Connected Directly to Production

A significant advantage of working with Alumproof is the direct connection between technical development and fabrication.

Our production facility uses CNC machining centres, high-precision cutting equipment, profile processing machinery, assembly stations, and dedicated tools for aluminium system fabrication.

This production knowledge is applied during the design review. Details are evaluated not only visually but also in terms of machining access, profile processing, fastener positioning, drainage, gasket continuity, assembly sequence, glazing, transport, and installation.

Direct communication between technical preparation and production helps reduce interpretation errors and improves the consistency between approved drawings and finished elements.

Why Work With Alumproof

A Practical Aluminium Systems Partner for Your Project

We combine architectural understanding, system knowledge, technical preparation, CNC production, and project logistics within one coordinated workflow.

3
EUROPEAN SYSTEM PLATFORMS
360°
PROJECT SUPPORT
CNC
CONTROLLED PRODUCTION
DWG + PDF
PROJECT DOCUMENTATION
EU
PROJECT DELIVERY

Start a Project

Send Your Drawings for Technical Review

Send us your plans, elevations, window schedules, facade details, specifications, or preliminary design documentation.

Please include the project location, required systems, approximate dimensions, expected performance, and planned project schedule where available.

PDF, DWG, XLSX, IFC, and image files can be submitted for initial review. Project documentation is treated confidentially.

Upload Project Documentation