Alumproof · Aluminium fabrication
Manufacturing & Quality Control
Aluminium windows, doors and facade systems, fabricated in our own workshop in Riga.
From approved drawings to profile processing, assembly and delivery — one coordinated production workflow.
Our own production facilities
Our own production workshop in Riga
Our workshop and storage facilities bring aluminium fabrication and project logistics together. From profile processing to assembly, inspection and preparation for dispatch, we coordinate the production route around your approved project information.
Own workshop & storage
Production capabilities built around the specification
Our workshop combines a FOM Industrie double-head saw, a Schüco machining centre, GRAULE milling machines and All Mecanic presses with Reynaers profile tooling. Würth auxiliary tools support the work between the principal processing and assembly stages. The production route follows the selected system, approved geometry and fabrication details.
Manufacturing accuracy matters at connections as well as individual components. The relationship between profiles, joints, seals, hardware and glazing must remain consistent with the system instructions and project requirements.
Equipment in our workshop
Specialist machines. A coordinated production route.
Our manufacturing equipment combines FOM Industrie cutting, a Schüco machining centre, GRAULE milling machines and All Mecanic presses with Reynaers tooling. Each machine has a defined role in preparing profiles for accurate, repeatable window and door fabrication.
01 · Profile cutting
Double-head profile cutting
Our FOM Industrie double-head saw prepares aluminium profiles to the specified lengths and cutting angles. Preparing both profile ends within a defined cutting setup supports consistent frame and sash geometry across repeated elements.
02 · Profile machining
Machining centre for aluminium profiles
Our Schüco machining centre performs programmed profile-processing operations for the approved element configuration. Coordinated machining helps reproduce the required feature positions across a production batch and prepare profiles for subsequent assembly.
03 · Milling operations
Dedicated milling and joint preparation
GRAULE milling machines complement the machining centre for the profile-processing tasks assigned to them. Milling is coordinated with the selected profile geometry, connection details and workshop setup so that the processed components are ready for assembly.
04 · System-specific tooling
Presses with Reynaers profile tooling
Our All Mecanic presses work with dedicated tooling for Reynaers, our main profile system. The appropriate tooling performs the specified repetitive profile operations with a consistent setup, supporting efficient serial production of windows and doors — particularly MasterLine 8.
Reynaers · MasterLine 8
Prepared for repeat window and door production
Dedicated Reynaers tooling on our All Mecanic presses helps us process repeated operations quickly and consistently. This is particularly useful for serial production of MasterLine 8 windows and doors, where the same approved details recur across many elements.
We coordinate cutting, machining, press operations and assembly around the approved configuration and the applicable Reynaers fabrication instructions.
- Repeatable setup: use the appropriate profile-specific tooling for the operation.
- Consistent preparation: reproduce the required details across repeated elements.
- Efficient sequencing: assign operations to the suitable machine or press before assembly.
- System coordination: verify tooling, profile references and processing details for the exact configuration.
Equipment brands identify the machinery and tools used in our workshop. Finished-element quality also depends on the approved details, correct setup, assembly and inspection.
Products & applications
Aluminium systems for different project needs
Windows
Fixed and opening aluminium windows, with profile selection and glazing coordinated around the project’s thermal, acoustic, structural and visual requirements.
Doors
Entrance and other aluminium door configurations. Discuss opening frequency, clear passage, accessibility, locking and the required operating arrangement.
Sliding & folding systems
Sliding, lift-and-slide and folding configurations reviewed against panel dimensions, glazing weight, threshold design and handling requirements.
Facade systems
Aluminium facade components and assemblies coordinated with the approved grid, connections, drainage concept and installation interfaces.
Our catalogue includes Schüco, Reynaers and Aluron systems. Availability, configuration and the manufacturing scope are reviewed for each enquiry. A system name alone does not define the finished element’s performance or suitability.
From drawings to dispatch
A structured manufacturing workflow
Technical documentation
Review drawings and element schedules, resolve outstanding interfaces and identify the approved revision. Confirm which dimensions are design information and which have been verified for manufacture.
Materials & component planning
Coordinate profile references, glass build-ups, hardware, seals and accessories. Finish selections and the agreed supply condition are part of the manufacturing information.
Cutting & CNC processing
Prepare profiles and machine the required features according to the fabrication details. Hole positions, joint preparation and drainage or ventilation paths must follow the selected system’s instructions.
Assembly & system integration
Bring processed components together with the specified connections, seals and hardware. Glazing preparation and completion are coordinated with the agreed factory and site responsibilities.
Inspection & identification
Review the element against its approved information and relevant checkpoints. Maintain recognisable element references so similar units can be distinguished through packing, receiving and installation.
Storage, packing & dispatch
Coordinate protection, pack contents, handling requirements and delivery sequence. Agree grouping by building, floor, zone or installation stage where the project requires it.
For the complete commercial and approval sequence, see How We Work / Project Process.
Digital preparation
Calculation before fabrication
We work with SchüCal, AluronCAD and Reynal to review system configurations and prepare project quotations. Trade partners can send existing calculation backups or exports together with drawings and an element schedule. We check compatibility and confirm the manufacturing scope before preparing our proposal.
Quality through the workflow
What the production checks need to establish
Quality control connects the approved specification with the finished element. The checkpoints and acceptance criteria depend on the product, system and agreed supply scope; an inspection should use the applicable documentation rather than an assumed universal tolerance.
| Control area | Points to review | Why it matters |
|---|---|---|
| Dimensions & geometry | Element dimensions, squareness, joint alignment and opening configuration | Fit, appearance and integration with the installation opening |
| Machined features | Connection preparation, hardware positions and required drainage features | Correct assembly and the intended system operation |
| Seals & connections | Specified components, continuity and the relevant joining details | Consistency of the assembled system |
| Hardware & operation | Component selection, fixing and opening or locking function where applicable | Usability and the agreed operating arrangement |
| Finish & glazing | Specified finish, visible condition and glass identification for the supply scope | Consistency with approved appearance and glass requirements |
| Dispatch readiness | Element references, contents, protection and agreed delivery grouping | Identification and efficient receiving on site |
Fabrication checks and performance evidence serve different purposes
A dimensional or visual inspection does not establish a thermal, acoustic, security or fire-resistance rating. Required performance must relate to the specified configuration and the relevant technical evidence. Discuss documentation requirements during the technical review.
See the certificates section and request the documents relevant to your selected system and project.
Storage & project logistics
Protect the order and keep the sequence clear
Our storage facilities support materials management and preparation for dispatch. The delivery plan should consider the available receiving area, storage conditions, unloading arrangements and the installation sequence.
We can develop and agree project-specific packaging, including division by floor, building, zone or installation stage. Whether the order is delivered together or in separate phases is agreed alongside the programme and handling requirements.
Prepare a useful manufacturing enquiry
Send drawings and an element schedule together with the information that defines the intended result:
- Project location, product types, quantities and element references.
- Dimensions, opening directions and any site measurement status.
- Required thermal, acoustic, structural, security or fire performance.
- Profile finish, glass specification and hardware preferences.
- Required supply condition and responsibilities for glazing or completion on site.
- Delivery destination, target programme and installation stages.
For repeat supply or contract manufacturing enquiries, identify your documentation, branding and receiving requirements. The production scope and feasibility are confirmed during the review.
Manufacturing questions
Can you manufacture to our project drawings?
Send the drawings and element schedules for a technical review. Architectural drawings may need additional fabrication information. Production follows the agreed specification and approved manufacturing documentation.
How are finishes and glass selected?
The finish, glass build-up and associated components are agreed for the application. Confirm colour references, exposure conditions, appearance requirements and any samples needed before the order is released.
What determines the production programme?
Approved information, material availability, quantities, complexity and the supply scope all affect the programme. Discuss the required dates early; the project schedule is agreed after the relevant technical and supply review.
Can the order be prepared for installation in stages?
Yes, project-specific grouping and packaging can be developed and agreed. Provide your element references and installation sequence so feasibility, labelling and the delivery arrangement can be reviewed.
Start with the project requirements
Discuss your aluminium manufacturing needs
Send your drawings, quantities and delivery requirements. We will review the technical scope and the next steps needed to prepare a project proposal.