Technical guide

Entrance Door Panels: Thermal Movement and Exposure Brief

An entrance panel can experience different temperatures on its inner and outer faces. Materials, colour and exposure should therefore be included in the supplier’s review. Ask how the proposed assembly accommodates its intended conditions without assuming that every panel finish behaves identically.

Alumproof · Technical resources · 2 min read

Concept illustration: Entrance Door Panels: Thermal Movement and Exposure Brief
AI-generated conceptual illustration. Refer to the selected system documentation for construction details.
On this page
  1. Describe the exposure accurately
  2. Ask for the complete panel approach
  3. Review operation and reporting
  4. Information to agree before manufacture
  5. A question to resolve early
  6. Manufacturer reference
  7. Related technical guides
  8. Discuss your project with Alumproof
Project focus: Discuss door-panel materials, colour, exposure and operating stability with the supplier before approving the assembly.

Describe the exposure accurately

Record orientation, shelter and the surrounding surfaces that may influence exposure. Identify the selected external and internal finishes. Provide this information alongside dimensions and infill construction. A colour sample establishes appearance, but it does not replace a technical review of the panel and hardware under the project’s intended conditions.

Ask for the complete panel approach

Request the supplier’s supported construction, applicable documentation and any relevant limitations. Confirm connections to the leaf frame and the selected hardware. Avoid claiming a particular movement-control technology is included unless it is documented for the actual offered variant. Keep approved alternatives visible rather than treating all doors in a product family as equivalent.

Review operation and reporting

Agree how the completed door is commissioned and what users should report if closing behaviour changes. Include qualified service access and the process for checking seals, locks and alignment. Temporary operation difficulties should be investigated through the supplier rather than corrected by forcing the door or modifying components without review.

Information to agree before manufacture

  • Record orientation, shelter and relevant exposure conditions.
  • Specify both panel faces and the complete build-up.
  • Obtain documentation for the actual offered variant.
  • Confirm panel, frame and hardware compatibility.
  • Agree commissioning and a service reporting process.
  • Retain approved finishes and configuration records.

A question to resolve early

Does choosing a light finish remove the need to review panel movement?

No. Colour is one consideration. Materials, construction, dimensions, exposure and the selected assembly still need confirmation by the supplier.

Manufacturer reference

AS 75P Unity provides an Aluron panel-door reference; the offered panel variant and exposure suitability must be confirmed for the project. Aluron: AS 75P Unity.

This reference illustrates a manufacturer’s system approach. Confirm availability, applicable documentation and the final configuration with the project supplier.

Related technical guides

Discuss your project with Alumproof

Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.

Send a project enquiry

All technical guides · Technical support for architects · Explore aluminium systems

Published by Alumproof. Technical information checked on 6 October 2026. Confirm the final specification against the documentation for the selected system and project configuration.