Technical guide

External Sun Shading for Windows and Facades

External shading can reduce solar gains before they reach the room. Its selection should be coordinated with the glazing and building geometry. A louvre, screen or blind that works on one elevation may provide a different result on another.

Alumproof · Technical resources · 2 min read

Concept illustration: External Sun Shading for Windows and Facades
AI-generated conceptual illustration. Refer to the selected system documentation for construction details.
On this page
  1. Start with orientation and occupancy
  2. Combine shading with the glass specification
  3. Resolve attachments and clearances
  4. Wind and control strategy
  5. Planning checklist
  6. Manufacturer reference
  7. Discuss your project with Alumproof

Start with orientation and occupancy

Identify the elevation, surrounding obstructions and times when glare or overheating is a concern. The designer should assess seasonal sun angles and room use. A fixed horizontal projection and an adjustable external screen produce different shading patterns; a visual preference alone does not establish their effectiveness.

Combine shading with the glass specification

Review the glazing g-value and light transmission together with the shading option. Aim for an appropriate balance of daylight, views and solar protection. Excessive shading can reduce useful daylight, while insufficient protection can leave a highly glazed room difficult to control.

Resolve attachments and clearances

Specify how shading is supported and where loads are transferred. Check clearance from opening sashes and access doors, and coordinate cables, guide tracks and facade drainage. Fixings must not compromise the window or facade seals. The system supplier should confirm compatible interfaces.

Wind and control strategy

Movable shading needs an operating strategy appropriate to weather exposure. Confirm manufacturer limits, sensor functions, user controls and behaviour during power loss. Do not assume the shading can remain deployed in every wind condition or that an automated system requires no maintenance.

Planning checklist

  • Orientation and seasonal shading assessment.
  • Glazing solar and daylight characteristics.
  • Approved support and fixing details.
  • Opening clearance and drainage continuity.
  • Controls, weather limits and service access.

For a proposed Brise Soleil or other louvre system, request project-specific geometry and attachment details. The manufacturer system name does not define the required blade spacing or structural capacity for every facade.

Read solar-control glass selection and facade coordination.

Manufacturer reference

Confirm the applicable documentation for the exact product, configuration and project location.

Discuss your project with Alumproof

Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.

Send a project enquiry

All technical guides · Technical support for architects · Explore aluminium systems

Published by Alumproof. Technical information checked on 6 October 2026. Confirm the final specification against the documentation for the selected system and project configuration.