Technical guide

Folding Doors with a Traffic Leaf: Daily Access Planning

A folding door may be opened fully only occasionally while one leaf is used every day. That daily access arrangement deserves its own review. Agree how people enter, close and lock the door when the rest of the assembly remains folded or closed.

Alumproof · Technical resources · 3 min read

Concept illustration: Folding Doors with a Traffic Leaf: Daily Access Planning
AI-generated conceptual illustration. Refer to the selected system documentation for construction details.
On this page
  1. Identify the usable door configuration
  2. Check the locking sequence
  3. Keep parked panels out of circulation
  4. Information to agree before manufacture
  5. A question to resolve early
  6. Manufacturer reference
  7. Related technical guides
  8. Discuss your project with Alumproof
Project focus: Plan a daily-use access leaf within a folding door, including locks, passage width, parking and opening sequence.

Identify the usable door configuration

Mark the proposed traffic leaf on the elevation with its handing and opening direction. Ask whether it can operate independently in the selected arrangement. Confirm the clear passage with the leaf in its working position. Panel count and folding direction can affect the available access options, so do not infer them from a generic product photograph.

Check the locking sequence

Review access from both sides, key operation and the sequence for locking the full assembly. Decide which users need independent entry and at which times. Coordinate handles with adjacent folding panels so normal use does not cause collisions. If access-control hardware is needed, obtain confirmation for the actual leaf and frame combination.

Keep parked panels out of circulation

Draw the folded stack in plan alongside the traffic leaf and surrounding furniture. Check approach space, internal finishes and the external terrace edge. A door may provide a wide opening while its parked leaves still obstruct a busy route. Include stops and the agreed protection of adjacent surfaces in the operating arrangement.

Information to agree before manufacture

  • Identify the traffic leaf, panel count and handing.
  • Confirm independent operation in the selected configuration.
  • Dimension clear passage and approach space.
  • Approve handles, locks and access from each side.
  • Show parked panels and the operating envelope in plan.
  • Include the normal closing and locking sequence in handover instructions.

A question to resolve early

Can any panel become the everyday entrance leaf?

The available arrangement depends on the selected folding system and panel configuration. Ask the supplier to show the supported traffic-leaf layout and its hardware before approving the elevation.

Manufacturer reference

Schüco AS FD 75/90.HI documentation includes configurations with an integrated side-hung access vent. Schüco: AS FD 75/90.HI folding design.

This reference illustrates a manufacturer’s system approach. Confirm availability, applicable documentation and the final configuration with the project supplier.

Related technical guides

Discuss your project with Alumproof

Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.

Send a project enquiry

All technical guides · Technical support for architects · Explore aluminium systems

Published by Alumproof. Technical information checked on 6 October 2026. Confirm the final specification against the documentation for the selected system and project configuration.