On this page
Separate building support from door geometry
Identify how the construction above the opening is supported and how loads reach the structure. The door supplier needs the relevant movement and support assumptions. Show the corner connection and anchorage on coordinated drawings. A product image showing an open corner is not evidence that the surrounding roof or facade can span the proposed opening.
Understand the closing sequence
Ask how the two sides meet, seal and lock at the corner. Show handles, interlocking profiles and any leaf that must close first. Confirm how users recognise a correctly closed assembly. Review the corner detail together with the threshold so the vertical seal and lower water-management arrangement are resolved as one connection.
Review exposure in both directions
A corner joins surfaces that may experience different wind-driven rain exposure. Coordinate paving falls, channels, waterproofing and any shelter with the selected door detail. Ask for evidence or assessment applicable to the proposed corner arrangement. Keep cleaning and servicing access available where mechanisms or seals meet in the corner.
Information to agree before manufacture
- Confirm structural support and movement assumptions.
- Identify the exact supported opening-corner configuration.
- Show closing order, meeting profiles and locking details.
- Coordinate the corner threshold and waterproofing junction.
- Review exposure, drainage and applicable performance evidence.
- Provide clear operation instructions for both sides.
A question to resolve early
Does an opening corner eliminate the need for structural design?
No. The building still needs a designed support arrangement, and the door connections must accommodate the agreed conditions. Structural coordination should happen before the opening dimensions are released for manufacture.
Manufacturer reference
Schüco’s sliding-system overview describes optional opening-corner arrangements for specified configurations. Schüco: Sliding-system product overview.
This reference illustrates a manufacturer’s system approach. Confirm availability, applicable documentation and the final configuration with the project supplier.
Related technical guides
Discuss your project with Alumproof
Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.
All technical guides · Technical support for architects · Explore aluminium systems