Technical guide

Pocket Lift-and-Slide Doors: Operating and Service Details

A lift-and-slide leaf that moves into a wall pocket combines the operating mechanism with a concealed building interface. The pocket must accommodate the approved assembly and leave a practical service route. Resolve those requirements before surrounding wall construction is closed.

Alumproof · Technical resources · 2 min read

Concept illustration: Pocket Lift-and-Slide Doors: Operating and Service Details
AI-generated conceptual illustration. Refer to the selected system documentation for construction details.
On this page
  1. Review the complete operating sequence
  2. Coordinate the concealed wall space
  3. Keep mechanisms reachable
  4. Information to agree before manufacture
  5. A question to resolve early
  6. Manufacturer reference
  7. Related technical guides
  8. Discuss your project with Alumproof
Project focus: Coordinate lift-and-slide pocket doors with the wall opening, operating sequence and access to concealed components.

Review the complete operating sequence

Ask how the leaf is lifted, moved into the pocket and returned to its sealed position. Show handle access at relevant stages. Check the parked position and remaining clear passage. The pocket layout should be based on the selected lift-and-slide arrangement, not a generic detail for another kind of sliding door.

Coordinate the concealed wall space

Dimension pocket clearances, supports, insulation and lining materials on coordinated sections. Identify drainage and the connection to adjacent waterproofing. Include construction tolerances and the process for checking the cavity before closure. The door supplier and wall designer should confirm how their details meet, with responsibilities recorded for each interface.

Keep mechanisms reachable

Identify access to hardware, seals and components requiring adjustment or replacement. Show removable closures and the space needed for the agreed service method. Explain how the leaf can be removed if that is part of the manufacturer-supported procedure. A concealed panel should not become inaccessible because permanent finishes were installed across its service route.

Information to agree before manufacture

  • Confirm the supported pocket and lift-and-slide combination.
  • Show handle access and the complete operating sequence.
  • Dimension cavity clearances and support positions.
  • Coordinate insulation, waterproofing and drainage interfaces.
  • Inspect the pocket before closing construction.
  • Retain access and removal procedures in maintenance documents.

A question to resolve early

Can the wall pocket be sized from the leaf thickness alone?

No. Guides, hardware, tolerances, connections and the approved service method also need space. Use the coordinated system detail for the actual assembly.

Manufacturer reference

Aluron lists pocket arrangements among the possibilities of AS 178HS PRO SLIM ULTRA. Aluron: AS 178HS PRO SLIM ULTRA.

This reference illustrates a manufacturer’s system approach. Confirm availability, applicable documentation and the final configuration with the project supplier.

Related technical guides

Discuss your project with Alumproof

Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.

Send a project enquiry

All technical guides · Technical support for architects · Explore aluminium systems

Published by Alumproof. Technical information checked on 6 October 2026. Confirm the final specification against the documentation for the selected system and project configuration.