On this page
- Explore 16 RAL colour ideas
- Powder coating, anodising and liquid coatings
- When powder coating is a useful choice
- When anodising is a useful choice
- Matt, satin, gloss and fine texture
- Weathering resistance and coastal exposure
- Different colours inside and outside
- A practical finish specification checklist
- Cleaning, damage and touch-up
- Frequently asked questions
- Continue planning your finish
- Technical references
- Discuss your project with Alumproof
Start with your design decision: choose a painted appearance or a metallic appearance, shortlist the colour, then confirm the required surface quality for the building’s environment.
Compare finishing processes · Explore colour ideas · Prepare a finish brief
Explore 16 RAL colour ideas
Select a reference below to change the illustrated frame. These are indicative colour previews for shortlisting, not exact RAL colour measurements or confirmed stock finishes. Confirm colour, gloss, texture and availability with a physical coated sample before ordering.
Illustrated frame preview
RAL 9016 · Traffic white
RAL 9010 · Pure white
RAL 9001 · Cream
RAL 7035 · Light grey
RAL 7037 · Dusty grey
RAL 7039 · Quartz grey
RAL 7006 · Beige grey
RAL 7016 · Anthracite grey
RAL 7024 · Graphite grey
RAL 7021 · Black grey
RAL 9005 · Jet black
RAL 8014 · Sepia brown
RAL 8017 · Chocolate brown
RAL 6005 · Moss green
RAL 5003 · Sapphire blue
RAL 3005 · Wine red
The same colour reference can look different in smooth matt, satin or textured finishes. The drawing shows a colour idea, not a product configuration.
Powder coating, anodising and liquid coatings
These processes create different surface systems. None is automatically the best choice for every building. Review the exact finish offered for the selected aluminium system, rather than comparing broad names alone.
| Process | What it does | Appearance and specification |
|---|---|---|
| Powder coating | A dry coating powder is applied to prepared aluminium and cured to form a coating film. | Broad colour choice, with smooth or textured options. Specify the powder product, colour, gloss, texture, required weathering quality and pretreatment. |
| Anodising | An electrochemical process develops an oxide layer on the aluminium surface. Appropriate sealing forms part of the finishing process. | Characteristic metallic appearance. Agree the surface preparation, anodising specification, supplier colour reference and appearance range. |
| Liquid coating | A liquid-applied coating system is used. Architectural specifications can include systems based on binders such as PVDF. | A separate coating specification, not a synonym for powder coating. Confirm product availability, complete layer system and applicable performance evidence. |
When powder coating is a useful choice
Powder coating offers flexibility when matching a facade colour concept, a contrasting entrance or different internal and external colours. RAL is a colour reference system, not a brand of coating or a durability grade. Two products described as RAL 7016 can share the intended colour reference while differing in gloss, texture, binder and weathering performance.
Ask the supplier to identify the complete coating product and finishing route. A frame, door handle and folded flashing made by different suppliers may not appear identical even when the same RAL number is specified. Compare samples of the visible components together before ordering.
When anodising is a useful choice
Anodising suits a design that emphasises a metallic surface rather than an opaque painted look. Natural, champagne, bronze and darker appearances may be available within a supplier’s range; names and reference systems differ. Alloy, surface preparation and production conditions can influence the finished appearance.
Agree an actual anodised sample and, where needed, an acceptable range of appearance. For prominent facades, discuss batch coordination and the visual relationship between profiles, sheets and accessories. A metallic powder coating, including a reference such as RAL 9006, should not be treated as equivalent to natural anodising.
Matt, satin, gloss and fine texture
Colour, gloss and texture describe different aspects of a finish. Matt has a subdued reflective appearance; satin provides a different sheen; a gloss finish has more pronounced reflections. Fine texture introduces a visibly and physically different surface. The supplier’s product data and sample establish the actual result.
Smooth matt
A restrained appearance with reduced visible sheen. Confirm the product’s actual gloss specification.
Satin / sheen
A smoother reflective effect that changes with the light and viewing angle.
Fine texture
A textured coating surface. Texture alone does not establish scratch resistance or durability.
There is no universal gloss number that every supplier uses for the word “matt”. Agree the named product and its declared gloss range, measured under its applicable method, when appearance matching matters.
Weathering resistance and coastal exposure
A finish specification should separate the appearance from the coating’s performance. QUALICOAT coating classes address weathering performance; a colour number, a matt surface or a textured appearance does not identify the class. Ask for the proposed coating product, relevant approval and supporting evidence. Weathering test periods are not a promise of service life or a project warranty.
Enhanced pretreatment for demanding exposure is a separate consideration. QUALICOAT SEASIDE and PRE-OX relate to pretreatment requirements rather than a different colour range. For coastal locations, discuss the actual environment, pretreatment, drainage, sheltered surfaces and cleaning access with the system and coating suppliers. A higher weathering class alone does not resolve every corrosion risk. Read our coastal environment guide and confirm the supplier’s project-specific requirements.
Different colours inside and outside
Some thermally broken systems can combine different internal and external colours, but availability depends on the system, profile construction and production route. Confirm the visible colour at open sashes, edges and junctions. Handles, hinges, gaskets, thresholds and flashings may have their own finish options; they will not automatically match the frame.
A practical finish specification checklist
- Component and side: identify frames, sashes, doors, flashings and the internal or external surfaces.
- Process: state powder coating, anodising or another agreed architectural coating system.
- Colour reference: give the RAL reference or the anodising supplier’s reference and approved appearance range.
- Appearance: state gloss and texture using the coating supplier’s terminology and agreed sample.
- Exposure and performance: record the location, environmental conditions and required coating and pretreatment evidence.
- Sample approval: approve a coated aluminium sample, viewed in the intended lighting alongside adjacent materials.
- Production and handover: confirm batch coordination, acceptable variation, care instructions, warranty conditions and repair procedures.
Cleaning, damage and touch-up
Follow the finish supplier’s cleaning instructions. Use suitable mild cleaning products, soft cloths and rinsing as specified; avoid abrasive pads and unapproved solvents. Remove construction residues using an approved method before they damage the surface. Plan safe access and a cleaning schedule appropriate to the exposure.
Touch-up paint may differ from the original factory finish in colour, gloss and texture. It does not automatically restore the original coating performance or warranty. Agree how scratches and damage will be assessed and repaired. See our window and door maintenance guide.
Frequently asked questions
Does the same RAL number always look identical?
No. Gloss, texture, substrate, application, lighting and neighbouring materials affect the appearance. Compare finished samples rather than a screen image alone.
Is anodising better than powder coating?
Neither process is universally better. Anodising provides a metallic appearance; powder coating offers many opaque colours and surface effects. The appropriate choice depends on the design, exposure, specification and supplier’s capabilities.
Are all colours in this palette available from Alumproof?
The palette is a design aid, not a stock or availability list. Confirm the selected colour, texture, coating system, minimum quantities and lead time for the chosen window or door system.
Can I approve a colour from this page?
Use this page to shortlist colours. Final approval should use an original physical colour reference and the supplier’s coated aluminium sample. A screen preview cannot establish an exact match.
Continue planning your finish
- How to choose aluminium window and door colours — coordinate the facade palette, internal view and physical sample approval.
- QUALICOAT classes and finish evidence — separate weathering quality, pretreatment and supplier documentation.
Technical references
- Hydro: aluminium surface treatment processes
- QUALICOAT: coating and production specifications
- QUALICOAT UK & Ireland: SEASIDE pretreatment
- RAL: official colour names and references
Project requirements and supplier documentation take precedence over this general guide. The palette uses illustrative screen colours, not measured RAL colour data.
Discuss your project with Alumproof
Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.
All technical guides · Technical support for architects · Explore aluminium systems