Schüco AB ZDS / AF UDC 80 – Integrated solar shading

Schüco AB ZDS in AF UDC 80 Solar Shading System for professional architectural projects. Key published data include maximum area 12 m²; power supply 230 V/50 Hz; installation type Integrated. Final values depend on configuration.

Category: Brand:
Certified quality systems
Project-specific configuration
Reliable project delivery support

Description

Schüco AB ZDS in AF UDC 80 Solar Shading System

Schüco AB ZDS in AF UDC 80 is a Schüco solar shading system developed for professional façade solar-control design. Alumproof provides system selection, feasibility review, detailed coordination, production documentation, CNC fabrication, assembly, glazing and project logistics. The configuration is selected for the actual element sizes, architectural intent, required performance and installation conditions.

Schüco AB ZDS in AF UDC 80 is the primary system reference used throughout this product specification.

The practical quality of Schüco AB ZDS in AF UDC 80 is decided during coordination: system limits, visual proportions, hardware, glazing, drainage and fixings must support the same design intent. Alumproof connects those decisions directly with fabrication.

Schüco AB ZDS in AF UDC 80 Technical Data

The following values originate from the referenced Schüco product information. They may describe maximum dimensions, best values or particular tested arrangements and must not be interpreted as simultaneous performance for every element.

Maximum area 12 m²
Power supply 230 V/50 Hz
Installation type Integrated
Wind resistance 25 m/s
Properties Sun shading, heat protection and screening
Surface finishes Textile

What the Published Values Mean for the Project

The published maximum area of 12 m² describes a system limit rather than an automatic design allowance. Proportions, loads, infill weight, hardware and exposure determine whether that size is feasible.

The published power supply is 230 V/50 Hz. Alumproof checks how this parameter interacts with dimensions, components, adjacent construction and the intended operating conditions.

The published installation type is Integrated. Alumproof checks how this parameter interacts with dimensions, components, adjacent construction and the intended operating conditions.

The wind-related value 25 m/s must be assessed against project wind pressure, element dimensions, support spacing and local corner zones. It should not be used without a structural check.

Key Design Considerations

  • Maximum area: 12 m².
  • Power supply: 230 V/50 Hz.
  • Installation type: Integrated.
  • Wind resistance: 25 m/s.
  • Properties: Sun shading, heat protection and screening.
  • Surface finishes: Textile.
  • Configuration: profiles, glazing or infill, hardware and interfaces are selected as one coordinated system.
  • Verification: final dimensions and performance are checked for the actual project arrangement.
  • Documentation: approved details are transferred into production and installation information.

Design, Performance and Application

Schüco AB ZDS in AF UDC 80 is selected from the façade orientation, glazing solar factor, window dimensions, required daylight level and risk of glare or overheating. The same product can perform differently on south-, east- and west-facing elevations. Alumproof therefore coordinates the shading geometry with the glass specification and architectural façade concept rather than treating it as a decorative accessory.

External screens, integrated blinds, textile systems and aluminium louvres have different limitations for size, wind exposure, fixing and operation. Guide rails, cassettes, blades, brackets, drives and control cables must be integrated without obstructing façade drainage or maintenance access. Where powered operation is required, motor location, power supply, control strategy and safe access for replacement are defined with the relevant project disciplines.

Wind resistance and maximum dimensions apply to specific arrangements and installation conditions. Building corners, high levels and exposed sites may experience local pressures above the general façade value. The final design therefore requires project wind data and a check of support spacing, blade orientation, guide details and retraction strategy. Solar performance may also need a project calculation using the actual glass and shading position.

Finish and colour influence both appearance and solar absorption. Aluminium components can be coordinated with adjacent window and façade profiles, while fabrics are selected for openness, colour, view-through and durability. Alumproof reviews junctions, tolerances, fastening points and fabrication requirements so that the shading system remains accessible and compatible with the building envelope.

Glazing, Infill and Interfaces

Glazing or opaque infill is selected for safety, thermal, acoustic, structural and visual requirements. The nominal capacity of a profile does not by itself confirm that a proposed glass build-up is suitable. Alumproof checks thickness, weight, edge cover, support, compatibility with gaskets and sealants, and the influence of the infill on the element hardware and frame. Where panels, back pans, membranes or insulation are included, their interfaces are documented as part of the complete construction.

Connections to concrete, steel, timber, roofing, insulation, waterproofing and internal finishes are developed around the actual opening and substrate. Particular attention is given to fixing access, edge distances, drainage paths, membrane continuity, movement, tolerances and replaceability. These details help preserve the intended performance of Schüco AB ZDS in AF UDC 80 after the element leaves the factory.

From Drawings to Production

Before Schüco AB ZDS in AF UDC 80 reaches production, the key decisions are visible in coordinated drawings: element references, profile zones, infill, opening direction, drainage, fixings and interfaces. This reduces ambiguity for procurement, CNC machining, assembly and site installation.

Alumproof reviews drawings, elevations, schedules and specifications before preparing production documentation. The review covers dimensions, opening logic, profile selection, component availability, machining access, hardware positions, drainage, glazing sequence, transport size and installation access. Questions that can affect cost or feasibility are raised before fabrication rather than being transferred to the construction site.

Approved profiles are cut and CNC-machined according to the production information. Assembly and glazing follow the selected system configuration, with checks appropriate to the product type and agreed quality plan. Finished elements are identified, protected and packed for coordinated delivery. Installation responsibilities, lifting conditions and site tolerances should be confirmed separately for each project.

Why Specify Schüco AB ZDS in AF UDC 80 Through Alumproof?

Alumproof combines architectural understanding with practical aluminium fabrication. This makes it possible to compare system variants, identify dimensional or interface risks, develop buildable details and maintain a direct connection between approved drawings and production. The objective is a technically coherent result that supports the architecture and can be manufactured, transported, installed and maintained as planned.

Related Alumproof Resources

Important System Note

All technical values, classifications and dimensional limits must be verified for the final Schüco AB ZDS in AF UDC 80 configuration. Actual performance depends on element size and proportions, selected profile variant, glazing or panel, hardware, seals, drainage, reinforcement, fixings, installation substrate and workmanship. A value published for one tested specimen or best-performing configuration must not be applied unconditionally to another construction.

Send your drawings, elevations, schedules or specification to Alumproof for a technical review and project quotation.