Schüco ASE 55 – Sliding doors

Schüco ASE 55 Aluminium Sliding Door System for professional architectural projects. Key published data include maximum vent weight 250 kg; minimum face width 43 mm; maximum glazing or panel thickness 38 mm. Final values depend on configuration.
Which dimensions and track layout are shown on the opening drawing? Project guide: New Sliding Solutions For High-Wind Regions.

Category: Brand:
Certified quality systems
Thermally insulated system
Reliable project delivery support

Description

Schüco ASE 55 Aluminium Sliding Door System

Schüco ASE 55 is a Schüco aluminium sliding door system for sliding and lift-and-slide door configurations. Alumproof provides system selection, feasibility review, detailed coordination, production documentation, CNC fabrication, assembly, glazing and project logistics. The configuration is selected for the actual element sizes, architectural intent, required performance and installation conditions.

Compare the panel layout, track arrangement and required clear opening before requesting a quotation. State whether you need a sliding or lift-and-slide configuration, and include the glazing, finish and installation scope in the brief.

Schüco ASE 55 gives the design team a defined Schüco platform from which a project-specific aluminium sliding door system can be developed. The final solution is shaped by the elevation, required function, exposure and the details at every perimeter connection.

Schüco ASE 55 Technical Data

The following values originate from the referenced Schüco product information. They may describe maximum dimensions, best values or particular tested arrangements and must not be interpreted as simultaneous performance for every element.

Maximum vent weight 250 kg
Minimum face width 43 mm
Maximum glazing or panel thickness 38 mm
Number of tracks Single, double or triple track
Opening types 1A, 1B, 1D, 2A, 2A/1, 2B, 2D, 2D/1, 3E, 3E/1 and 3F

What the Published Values Mean for the Project

The stated maximum vent weight of 250 kg is relevant only with the appropriate hardware, geometry and support conditions. Operating forces, transport and installation method may impose a lower project limit.

A published minimum face width of 43 mm helps the design team understand the achievable sightline. The final elevation still depends on the selected outer frame, vent, mullion, transom or interlock combination.

The maximum glazing or panel thickness of 38 mm defines an important compatibility limit. Glass build-up, edge cover, weight, safety class, coating position and gasket selection must all be checked together.

The published configurations have single, double or triple tracks. Alumproof checks how this parameter interacts with dimensions, components, adjacent construction and the intended operating conditions.

Key Design Considerations

  • Maximum vent weight: 250 kg.
  • Minimum face width: 43 mm.
  • Maximum glazing or panel thickness: 38 mm.
  • Number of tracks: Single, double or triple track.
  • Opening types: 1A, 1B, 1D, 2A, 2A/1, 2B, 2D, 2D/1, 3E, 3E/1 and 3F.
  • Configuration: profiles, glazing or infill, hardware and interfaces are selected as one coordinated system.
  • Verification: final dimensions and performance are checked for the actual project arrangement.
  • Documentation: approved details are transferred into production and installation information.

Design, Performance and Application

Schüco ASE 55 constructions are governed by panel dimensions, glass weight, track geometry, rollers, interlocks, handles and threshold design. Alumproof develops the configuration as one coordinated assembly. The number of tracks, opening direction, fixed and moving panels and required clear opening are established before profile and hardware selection.

Minimal sightlines require accurate control of tolerances and deflection. Glass thickness and weight affect the running gear, while panel proportions influence operation and weather performance. For sliding and lift-and-slide configurations, confirm the permissible element size using the applicable Schüco documentation and selected hardware variant. Do not transfer limits from a different system or opening type.

The threshold and drainage concept are critical at the interface between interior and exterior levels. Recessed tracks may improve visual continuity but need coordinated waterproofing, outlets, maintenance access and external surface falls. Barrier-free aspirations must be reconciled with exposure, rainfall, wind pressure and the project-specific risk of water ingress. Head and jamb fixings must also allow the frame to remain straight under building movement and installation loads.

Thermal, acoustic, air, water and wind classifications refer to tested element configurations. Final results vary with panel size, glass, interlock, threshold and opening arrangement. Alumproof reviews these dependencies and prepares production information covering profile machining, drainage, hardware positioning, glazing blocks, assembly sequence and installation interfaces.

Glazing, Infill and Interfaces

Glazing or opaque infill is selected for safety, thermal, acoustic, structural and visual requirements. The nominal capacity of a profile does not by itself confirm that a proposed glass build-up is suitable. Alumproof checks thickness, weight, edge cover, support, compatibility with gaskets and sealants, and the influence of the infill on the element hardware and frame. Where panels, back pans, membranes or insulation are included, their interfaces are documented as part of the complete construction.

Connections to concrete, steel, timber, roofing, insulation, waterproofing and internal finishes are developed around the actual opening and substrate. Particular attention is given to fixing access, edge distances, drainage paths, membrane continuity, movement, tolerances and replaceability. These details help preserve the intended performance of Schüco ASE 55 after the element leaves the factory.

From Drawings to Production

The design conversation around Schüco ASE 55 normally moves from appearance to function and then to buildability. We compare the required opening or grid with the system limits, resolve the glass and hardware concept and develop junctions that can be manufactured and installed without losing the original architectural idea.

Alumproof reviews drawings, elevations, schedules and specifications before preparing production documentation. The review covers dimensions, opening logic, profile selection, component availability, machining access, hardware positions, drainage, glazing sequence, transport size and installation access. Questions that can affect cost or feasibility are raised before fabrication rather than being transferred to the construction site.

Approved profiles are cut and CNC-machined according to the production information. Assembly and glazing follow the selected system configuration, with checks appropriate to the product type and agreed quality plan. Finished elements are identified, protected and packed for coordinated delivery. Installation responsibilities, lifting conditions and site tolerances should be confirmed separately for each project.

Why Specify Schüco ASE 55 Through Alumproof?

Alumproof combines architectural understanding with practical aluminium fabrication. This makes it possible to compare system variants, identify dimensional or interface risks, develop buildable details and maintain a direct connection between approved drawings and production. The objective is a technically coherent result that supports the architecture and can be manufactured, transported, installed and maintained as planned.

Related Alumproof Resources

Important System Note

All technical values, classifications and dimensional limits must be verified for the final Schüco ASE 55 configuration. Actual performance depends on element size and proportions, selected profile variant, glazing or panel, hardware, seals, drainage, reinforcement, fixings, installation substrate and workmanship. A value published for one tested specimen or best-performing configuration must not be applied unconditionally to another construction.

Send your drawings, elevations, schedules or specification to Alumproof for a technical review and project quotation.

What does 43 mm mean on an ASE 55 drawing?

The 43 mm dimension refers to the visible width of the DesignLine interlock where the sliding panels meet. For a project elevation, specify the outer frame and the clear opening separately. Schüco ASE 55 — DesignLine.