Schüco ERC 50 – Facade system

Schüco ERC 50 Aluminium Façade System for professional architectural projects. Key published data include surface finishes Powder-coated, anodised or painted; air permeability AE 1350; watertightness RE 1350. Final values depend on configuration.

Category: Brand:
Certified quality systems
Thermally insulated system
Reliable project delivery support

Description

Schüco ERC 50 Aluminium Façade System

Schüco ERC 50 is a Schüco aluminium façade system developed for professional glazed façade construction. Alumproof provides system selection, feasibility review, detailed coordination, production documentation, CNC fabrication, assembly, glazing and project logistics. The configuration is selected for the actual element sizes, architectural intent, required performance and installation conditions.

Schüco ERC 50 is the primary system reference used throughout this product specification.

Schüco ERC 50 gives the design team a defined Schüco platform from which a project-specific aluminium façade system can be developed. The final solution is shaped by the elevation, required function, exposure and the details at every perimeter connection.

Schüco ERC 50 Technical Data

The following values originate from the referenced Schüco product information. They may describe maximum dimensions, best values or particular tested arrangements and must not be interpreted as simultaneous performance for every element.

Surface finishes Powder-coated, anodised or painted
Air permeability AE 1350
Watertightness RE 1350

What the Published Values Mean for the Project

The published surface finish options are powder coating, anodising or painting. Alumproof checks how this parameter interacts with dimensions, components, adjacent construction and the intended operating conditions.

The air-permeability classification AE 1350 belongs to a tested construction. Continuity of seals, corner joints, hardware adjustment and the perimeter connection are essential to reproduce comparable behaviour.

The watertightness result RE 1350 depends on the tested geometry, drainage and pressure conditions. Thresholds, outlets and interfaces must be adapted to the building exposure and finished floor levels.

Key Design Considerations

  • Surface finishes: Powder-coated, anodised or painted.
  • Air permeability: AE 1350.
  • Watertightness: RE 1350.
  • Configuration: profiles, glazing or infill, hardware and interfaces are selected as one coordinated system.
  • Verification: final dimensions and performance are checked for the actual project arrangement.
  • Documentation: approved details are transferred into production and installation information.

Design, Performance and Application

Schüco ERC 50 is developed as an engineered grid of load-bearing profiles, pressure zones, seals, glazing supports and connections. Mullion and transom depths are selected from structural requirements rather than appearance alone. Glass dimensions, support conditions, building height, wind exposure, bay width and bracket spacing all influence the final profile and reinforcement strategy.

Façade design also requires controlled water management. External seals, pressure equalisation chambers, drainage paths and compartmentation must work continuously across mullions, transoms, corners and opening elements. Alumproof prepares project details that coordinate these functions with slab edges, parapets, roofs, plinths, adjacent cladding and internal finishes. Movement allowances are considered where the façade must accommodate structural deflection or thermal expansion.

The glazing specification is checked for thickness, build-up, edge cover, weight, safety requirements and compatibility with gaskets, setting blocks and structural bonding where applicable. Opaque infill zones may require insulation, back pans, vapour control and fire-stopping as separate project-designed layers. Opening windows, doors and solar shading are integrated only where the selected Schüco combination provides a technically compatible interface.

Performance data shown for a façade platform are based on defined test arrangements and do not automatically describe every project elevation. Air permeability, watertightness, wind-load resistance, thermal behaviour, acoustics and burglar resistance depend on grid dimensions, profile selection, joints, infill and workmanship. The project application of Schüco ERC 50 must therefore be assessed as a complete envelope assembly.

Glazing, Infill and Interfaces

Glazing or opaque infill is selected for safety, thermal, acoustic, structural and visual requirements. The nominal capacity of a profile does not by itself confirm that a proposed glass build-up is suitable. Alumproof checks thickness, weight, edge cover, support, compatibility with gaskets and sealants, and the influence of the infill on the element hardware and frame. Where panels, back pans, membranes or insulation are included, their interfaces are documented as part of the complete construction.

Connections to concrete, steel, timber, roofing, insulation, waterproofing and internal finishes are developed around the actual opening and substrate. Particular attention is given to fixing access, edge distances, drainage paths, membrane continuity, movement, tolerances and replaceability. These details help preserve the intended performance of Schüco ERC 50 after the element leaves the factory.

From Drawings to Production

The design conversation around Schüco ERC 50 normally moves from appearance to function and then to buildability. We compare the required opening or grid with the system limits, resolve the glass and hardware concept and develop junctions that can be manufactured and installed without losing the original architectural idea.

Alumproof reviews drawings, elevations, schedules and specifications before preparing production documentation. The review covers dimensions, opening logic, profile selection, component availability, machining access, hardware positions, drainage, glazing sequence, transport size and installation access. Questions that can affect cost or feasibility are raised before fabrication rather than being transferred to the construction site.

Approved profiles are cut and CNC-machined according to the production information. Assembly and glazing follow the selected system configuration, with checks appropriate to the product type and agreed quality plan. Finished elements are identified, protected and packed for coordinated delivery. Installation responsibilities, lifting conditions and site tolerances should be confirmed separately for each project.

Why Specify Schüco ERC 50 Through Alumproof?

Alumproof combines architectural understanding with practical aluminium fabrication. This makes it possible to compare system variants, identify dimensional or interface risks, develop buildable details and maintain a direct connection between approved drawings and production. The objective is a technically coherent result that supports the architecture and can be manufactured, transported, installed and maintained as planned.

Related Alumproof Resources

Important System Note

All technical values, classifications and dimensional limits must be verified for the final Schüco ERC 50 configuration. Actual performance depends on element size and proportions, selected profile variant, glazing or panel, hardware, seals, drainage, reinforcement, fixings, installation substrate and workmanship. A value published for one tested specimen or best-performing configuration must not be applied unconditionally to another construction.

Send your drawings, elevations, schedules or specification to Alumproof for a technical review and project quotation.