Schüco FW 60+ XR – Security facade

Schüco FW 60+ XR Security System for professional architectural projects. Key published data include minimum visible profile width 60 mm; burglar resistance Up to RC 2; blast resistance Yes. Final values depend on configuration.

Category: Brand:
Certified quality systems
Thermally insulated system
Reliable project delivery support

Description

Schüco FW 60+ XR Security System

Schüco FW 60+ XR is a Schüco security system developed for professional specialist building-envelope integration. Alumproof provides system selection, feasibility review, detailed coordination, production documentation, CNC fabrication, assembly, glazing and project logistics. The configuration is selected for the actual element sizes, architectural intent, required performance and installation conditions.

Schüco FW 60+ XR is the primary system reference used throughout this product specification.

For architects and contractors, Schüco FW 60+ XR should be evaluated as a complete security system, not as a profile code taken out of context. Its architectural value comes from the relationship between visible geometry, usable dimensions, infill and the surrounding building envelope.

Schüco FW 60+ XR Technical Data

The following values originate from the referenced Schüco product information. They may describe maximum dimensions, best values or particular tested arrangements and must not be interpreted as simultaneous performance for every element.

Minimum visible profile width 60 mm
Burglar resistance Up to RC 2
Blast resistance Yes

What the Published Values Mean for the Project

A published minimum visible profile width of 60 mm helps the design team understand the achievable sightline. The final elevation still depends on the selected outer frame, vent, mullion, transom or interlock combination.

The stated resistance Up to RC 2 applies only to a verified complete assembly. Profiles, glass or infill, hardware, anchors and supporting construction must correspond to the approved configuration.

The stated blast resistance applies only to a verified complete assembly. Profiles, glass or infill, hardware, anchors and supporting construction must correspond to the approved configuration.

Key Design Considerations

  • Minimum visible profile width: 60 mm.
  • Burglar resistance: Up to RC 2.
  • Blast resistance: Yes.
  • Configuration: profiles, glazing or infill, hardware and interfaces are selected as one coordinated system.
  • Verification: final dimensions and performance are checked for the actual project arrangement.
  • Documentation: approved details are transferred into production and installation information.

Design, Performance and Application

Schüco FW 60+ XR performs a specialised function within the building envelope. Its value depends on correct integration with windows, doors, façades, structure and building services. Alumproof first defines the project objective and then checks whether the selected variant, dimensions and interfaces correspond to the manufacturer documentation.

For balcony and roof systems, structural loads, drainage, waterproofing, glass support and connections to the façade are coordinated. For ventilation products, airflow, acoustic requirements, controls, maintenance access and condensation risk are reviewed. For security and protective systems, the declared resistance applies only to the complete tested assembly, including infill, hardware, anchors and supporting construction.

The architectural layout must leave sufficient space for profiles, fixings, drives, ducts, drainage and replacement access. Adjacent insulation, membranes and finishes are shown in project details so that the specialist component does not interrupt the weather line or create an unserviceable concealed junction. Dimensions and tolerances are checked against fabrication, transport and installation conditions.

Alumproof translates the approved concept into production-oriented information and coordinates machining, components, assembly and quality checks. Any stated classification, capacity or maximum dimension remains conditional on the exact system variant and project configuration. Where the manufacturer data do not cover the proposed arrangement, additional engineering confirmation is required before manufacture.

Glazing, Infill and Interfaces

Glazing or opaque infill is selected for safety, thermal, acoustic, structural and visual requirements. The nominal capacity of a profile does not by itself confirm that a proposed glass build-up is suitable. Alumproof checks thickness, weight, edge cover, support, compatibility with gaskets and sealants, and the influence of the infill on the element hardware and frame. Where panels, back pans, membranes or insulation are included, their interfaces are documented as part of the complete construction.

Connections to concrete, steel, timber, roofing, insulation, waterproofing and internal finishes are developed around the actual opening and substrate. Particular attention is given to fixing access, edge distances, drainage paths, membrane continuity, movement, tolerances and replaceability. These details help preserve the intended performance of Schüco FW 60+ XR after the element leaves the factory.

From Drawings to Production

A typical review starts with the project location, elevations, element schedule and required performance. For Schüco FW 60+ XR, Alumproof then identifies missing assumptions, checks the proposed dimensions and records which data must be confirmed by the architect, engineer, glass supplier or installation team.

Alumproof reviews drawings, elevations, schedules and specifications before preparing production documentation. The review covers dimensions, opening logic, profile selection, component availability, machining access, hardware positions, drainage, glazing sequence, transport size and installation access. Questions that can affect cost or feasibility are raised before fabrication rather than being transferred to the construction site.

Approved profiles are cut and CNC-machined according to the production information. Assembly and glazing follow the selected system configuration, with checks appropriate to the product type and agreed quality plan. Finished elements are identified, protected and packed for coordinated delivery. Installation responsibilities, lifting conditions and site tolerances should be confirmed separately for each project.

Why Specify Schüco FW 60+ XR Through Alumproof?

Alumproof combines architectural understanding with practical aluminium fabrication. This makes it possible to compare system variants, identify dimensional or interface risks, develop buildable details and maintain a direct connection between approved drawings and production. The objective is a technically coherent result that supports the architecture and can be manufactured, transported, installed and maintained as planned.

Related Alumproof Resources

Important System Note

All technical values, classifications and dimensional limits must be verified for the final Schüco FW 60+ XR configuration. Actual performance depends on element size and proportions, selected profile variant, glazing or panel, hardware, seals, drainage, reinforcement, fixings, installation substrate and workmanship. A value published for one tested specimen or best-performing configuration must not be applied unconditionally to another construction.

Send your drawings, elevations, schedules or specification to Alumproof for a technical review and project quotation.