Sliding or lift-and-slide terrace doors?
Start with the route from the room to the terrace. How wide must the passage be when the door is open, and who will operate it every day? These two answers narrow the choice faster than the overall frame width.
How the moving panel works
A conventional sliding panel runs sideways on its rollers. With a lift-and-slide door, turning the handle raises the panel for travel. Returning the handle to its closed position lowers the panel onto the seals. Try the whole sequence on a sample of comparable size: release the handle, start the panel moving, stop it and close it again. The effort at the handle and the effort to move the panel are separate considerations.
Read the clear opening on the plan
In a two-panel arrangement with one fixed light, the moving panel parks alongside the fixed glass. For example, a 3,000 mm frame divided into two equal bays gives a nominal half-width of 1,500 mm. The usable passage will be smaller once jambs, overlapping profiles, stops and handle clearance are accounted for. Ask for the clear width in millimetres with the leaf fully open. A three-track layout can let two leaves stack behind a third where the system supports it, but it also requires a deeper sill.
Check the weight of the specified glass
Give the fabricator the proposed glass build-up as well as the panel dimensions. Laminated glass, thicker panes or a change to triple glazing can alter the moving weight enough to affect the hardware selection. Ask for confirmation that the proposed leaf width, height and glazed weight are permitted together. Reynaers describes both its HiFinity sliding system and the lift-and-slide version of ConceptPatio 155 in its Smart Buildings brochure.
Compare quotations on the same drawing
Mark fixed and moving panels, their direction of travel and the side from which the handle is reached. Request a threshold section showing floor levels and drainage. For a frequently used terrace entrance, compare the clear passage, manual operating effort and ease of cleaning the track. If powered operation is proposed, also ask how the door is operated during a power cut and how the drive is accessed for service.