Technical guide

Window and Door Burglar Resistance: RC Classes

Burglar resistance is a performance of a complete assembly. The frame, glass, locking components and installation all contribute. A lock or pane advertised as a security product does not automatically give an ordinary window a declared resistance class.

Alumproof · Technical resources · 2 min read

Concept illustration: Window and Door Burglar Resistance: RC Classes
AI-generated conceptual illustration. Refer to the selected system documentation for construction details.
On this page
  1. What a resistance class means
  2. Match the evidence to the proposed unit
  3. Do not confuse safety glass with security glass
  4. Operating position matters
  5. Specification checklist
  6. Manufacturer reference
  7. Discuss your project with Alumproof

What a resistance class means

RC classifications describe resistance under defined test conditions. When a class is requested, identify the applicable standard, the tested configuration and the supporting documentation. The project security brief should determine the required level; a class label is not a promise that intrusion is impossible.

Match the evidence to the proposed unit

Check system variant, opening type, dimensions, glazing and hardware against the manufacturer’s permitted configuration. A test for one door arrangement may not cover a different threshold or side panel. The supplier should confirm any changes and the required installation conditions.

Do not confuse safety glass with security glass

Safety-glass provisions address particular injury risks and breakage behaviour. Resistance to attack is a different requirement. Laminated glass can have different compositions and purposes, so request the actual glass performance needed for the specified complete assembly.

Operating position matters

Security performance must be understood for the intended closed and locked condition, unless specific evidence covers another position. Do not assume a tilted or partly open window retains the same protection. Lockable handles and opening restrictors have defined functions that should be explained at handover.

Specification checklist

  • Project security requirement and relevant standard.
  • Evidence for the complete proposed configuration.
  • Specified glass, locks, hardware and accessories.
  • Required fixing substrate and installation conditions.
  • Clear instructions for correct locking and ongoing servicing.

Coordinate security with accessible use and any escape requirements. These objectives need a compatible approved arrangement rather than separate components chosen independently.

Read entrance hardware planning and safety glass distinctions.

Manufacturer reference

Confirm the applicable documentation for the exact product, configuration and project location.

Discuss your project with Alumproof

Send your drawings, project location and required performance. We can review the information and clarify the system configuration and quotation scope.

Send a project enquiry

All technical guides · Technical support for architects · Explore aluminium systems

Published by Alumproof. Technical information checked on 6 October 2026. Confirm the final specification against the documentation for the selected system and project configuration.