Emergency exit doors: choosing the right aluminium door system

Emergency exit doors: choosing the right aluminium door system
On this page

Emergency exit doors are part of a building’s escape strategy. Their purpose is to let people leave quickly and intuitively when it matters most. For an aluminium entrance, choosing the profile is only the beginning: the door leaf, frame, locking device, hinges, glazing and installation must work together as a suitable assembly.

EN 179 or EN 1125: start with the users

EN 179 covers emergency exit devices operated by a lever handle or push pad. They are intended for situations where users are familiar with the exit and its operation and panic is unlikely. EN 1125 covers panic exit devices operated by a horizontal bar, intended for situations where panic may occur and users may not know the building. A familiar office team and visitors in a busy public venue do not necessarily need the same solution. The project’s fire strategy and applicable local requirements determine the choice; the building’s name alone is not enough.

Specify a complete door assembly

A panic bar does not automatically turn an ordinary entrance door into a suitable emergency exit. Specify a documented combination of profiles, locking components and operating hardware within the manufacturer’s permitted dimensions and configurations. For double-leaf doors, check how both leaves release, their opening sequence and the usable escape width. The leaves and fittings must not obstruct one another. For Schüco, Reynaers or another system, request documentation for the actual configuration rather than assuming that every version in a product family has the same suitability.

Escape, fire protection and security are different functions

An emergency exit door is not automatically a fire-resistant or smoke-control door. If the opening is also part of a fire compartment, the required fire and smoke performance must be specified and supported by the relevant evidence for the complete assembly. Security from outside must be compatible with escape from inside. Access control, electric locking and automation require a coordinated design, including the intended response to an alarm or power failure. Do not add an independent lock that defeats the escape function.

What to include in the project brief

Record the building use, expected occupants, escape direction, required clear opening and accessibility needs. Confirm whether the door is internal or external, single- or double-leaf, and whether fire or smoke performance is required. For an external aluminium door, also discuss thermal insulation, weather exposure, glazing, threshold detail and drainage. Agree the finish, access-control interface, required documentation and maintenance responsibilities before ordering. These details help avoid a visually suitable door that fails to meet the operational brief.

Installation, handover and maintenance

At handover, check operation from the escape side, unobstructed opening and the interaction of locks, closers and any electrical controls. Keep the escape route clear and retain the manufacturer’s operating and maintenance instructions. Inspection intervals should reflect those instructions, the building’s requirements and intensity of use. Report stiffness, damaged hardware or incomplete closing promptly; replacement parts must remain compatible with the approved configuration.

Plan your aluminium emergency exit doors with Alumproof

Send Alumproof the door schedule, drawings, project location and required escape and fire-safety functions. We can discuss an aluminium solution around the project brief and identify the configuration that needs to be verified. This guide explains the main selection questions; final compliance is determined for the specific project under the applicable local requirements.

Discuss your project

Technical references

Which handle, lock and opening direction are specified for this door? Record the hardware set and opening direction against the door number on the drawings and in the door schedule. System details: Reynaers Vision 7.