Schüco ASE 70 PD.ME – Panoramic sliding doors

Schüco ASE 70 PD.ME Aluminium Sliding Door System for professional architectural projects. Key published data include minimum interlock face width 39 mm; maximum glazing or panel thickness 40 mm; glazing or panel thickness range 24–40 mm. Final values depend on configuration.

Category: Brand:
Certified quality systems
Project-specific configuration
Reliable project delivery support

Description

Schüco ASE 70 PD.ME Aluminium Sliding Door System

Schüco ASE 70 PD.ME is a Schüco aluminium sliding door system developed for professional large-format sliding and folding construction. Alumproof provides system selection, feasibility review, detailed coordination, production documentation, CNC fabrication, assembly, glazing and project logistics. The configuration is selected for the actual element sizes, architectural intent, required performance and installation conditions.

Schüco ASE 70 PD.ME is the primary system reference used throughout this product specification.

For architects and contractors, Schüco ASE 70 PD.ME should be evaluated as a complete aluminium sliding door system, not as a profile code taken out of context. Its architectural value comes from the relationship between visible geometry, usable dimensions, infill and the surrounding building envelope.

Schüco ASE 70 PD.ME Technical Data

The following values originate from the referenced Schüco product information. They may describe maximum dimensions, best values or particular tested arrangements and must not be interpreted as simultaneous performance for every element.

Minimum interlock face width 39 mm
Maximum glazing or panel thickness 40 mm
Glazing or panel thickness range 24–40 mm
Area of application External use and residential projects
Surface finishes Powder-coated or painted
Air permeability Class 4
Watertightness Class 8A
Wind-load resistance Class C5

What the Published Values Mean for the Project

A published minimum interlock face width of 39 mm helps the design team understand the achievable sightline. The final elevation still depends on the selected outer frame, vent, mullion, transom or interlock combination.

The maximum glazing or panel thickness of 40 mm defines an important compatibility limit. Glass build-up, edge cover, weight, safety class, coating position and gasket selection must all be checked together.

The glazing or panel thickness range of 24–40 mm defines an important compatibility limit. Glass build-up, edge cover, weight, safety class, coating position and gasket selection must all be checked together.

The published applications include external use and residential projects. Suitability for a particular project depends on element proportions, loads, infill weight, hardware and exposure.

Key Design Considerations

  • Minimum interlock face width: 39 mm.
  • Maximum glazing or panel thickness: 40 mm.
  • Glazing or panel thickness range: 24–40 mm.
  • Area of application: External use and residential projects.
  • Surface finishes: Powder-coated or painted.
  • Air permeability: Class 4.
  • Watertightness: Class 8A.
  • Wind-load resistance: Class C5.
  • Configuration: profiles, glazing or infill, hardware and interfaces are selected as one coordinated system.
  • Verification: final dimensions and performance are checked for the actual project arrangement.
  • Documentation: approved details are transferred into production and installation information.

Design, Performance and Application

Schüco ASE 70 PD.ME constructions are governed by panel dimensions, glass weight, track geometry, rollers, interlocks, handles and threshold design. Alumproof develops the configuration as one coordinated assembly. The number of tracks, opening direction, fixed and moving panels and required clear opening are established before profile and hardware selection.

Minimal sightlines require accurate control of tolerances and deflection. Glass thickness and weight affect the running gear, while panel proportions influence operation and weather performance. For lift-and-slide, standard sliding, panorama or folding configurations, the permissible element size must be confirmed from the applicable Schüco documentation and the selected hardware variant rather than inferred from a different typology.

The threshold and drainage concept are critical at the interface between interior and exterior levels. Recessed tracks may improve visual continuity but need coordinated waterproofing, outlets, maintenance access and external surface falls. Barrier-free aspirations must be reconciled with exposure, rainfall, wind pressure and the project-specific risk of water ingress. Head and jamb fixings must also allow the frame to remain straight under building movement and installation loads.

Thermal, acoustic, air, water and wind classifications refer to tested element configurations. Final results vary with panel size, glass, interlock, threshold and opening arrangement. Alumproof reviews these dependencies and prepares production information covering profile machining, drainage, hardware positioning, glazing blocks, assembly sequence and installation interfaces.

Glazing, Infill and Interfaces

Glazing or opaque infill is selected for safety, thermal, acoustic, structural and visual requirements. The nominal capacity of a profile does not by itself confirm that a proposed glass build-up is suitable. Alumproof checks thickness, weight, edge cover, support, compatibility with gaskets and sealants, and the influence of the infill on the element hardware and frame. Where panels, back pans, membranes or insulation are included, their interfaces are documented as part of the complete construction.

Connections to concrete, steel, timber, roofing, insulation, waterproofing and internal finishes are developed around the actual opening and substrate. Particular attention is given to fixing access, edge distances, drainage paths, membrane continuity, movement, tolerances and replaceability. These details help preserve the intended performance of Schüco ASE 70 PD.ME after the element leaves the factory.

From Drawings to Production

A typical review starts with the project location, elevations, element schedule and required performance. For Schüco ASE 70 PD.ME, Alumproof then identifies missing assumptions, checks the proposed dimensions and records which data must be confirmed by the architect, engineer, glass supplier or installation team.

Alumproof reviews drawings, elevations, schedules and specifications before preparing production documentation. The review covers dimensions, opening logic, profile selection, component availability, machining access, hardware positions, drainage, glazing sequence, transport size and installation access. Questions that can affect cost or feasibility are raised before fabrication rather than being transferred to the construction site.

Approved profiles are cut and CNC-machined according to the production information. Assembly and glazing follow the selected system configuration, with checks appropriate to the product type and agreed quality plan. Finished elements are identified, protected and packed for coordinated delivery. Installation responsibilities, lifting conditions and site tolerances should be confirmed separately for each project.

Why Specify Schüco ASE 70 PD.ME Through Alumproof?

Alumproof combines architectural understanding with practical aluminium fabrication. This makes it possible to compare system variants, identify dimensional or interface risks, develop buildable details and maintain a direct connection between approved drawings and production. The objective is a technically coherent result that supports the architecture and can be manufactured, transported, installed and maintained as planned.

Related Alumproof Resources

Important System Note

All technical values, classifications and dimensional limits must be verified for the final Schüco ASE 70 PD.ME configuration. Actual performance depends on element size and proportions, selected profile variant, glazing or panel, hardware, seals, drainage, reinforcement, fixings, installation substrate and workmanship. A value published for one tested specimen or best-performing configuration must not be applied unconditionally to another construction.

Send your drawings, elevations, schedules or specification to Alumproof for a technical review and project quotation.